The set
4 printed parts: three building rows and a harbor plate. Plus 6 disc magnets, 6 × 2 mm, two for each row.
- Largest row
- 164 × 122.5 mm
- Harbor plate
- 194.4 × 65.6 mm
- Building depth
- up to 0.47 in, so the rows fold flat 12 mm
A city pack for the Moonlit Atlas book
Tower Bridge stands open, both bascules raised, a tall ship sailing through. Put this set in your Moonlit Atlas, press the brass button, and London stands up under the moon.
The Moonlit Atlas book, closed: 8.1 × 6.7 × 2.5 in. With this pack, London is what folds flat inside it. Scroll to open it.
Press the brass button. The latch lets go, two torsion springs lift the lid, and a gear damper keeps it slow.
London's three rows stand up with the lid and are upright at 90°: the skyline at the back, the river in the middle, the street in front.
On the river, Tower Bridge is open. Both bascules are raised to 80° and a two-masted ship sails through under the high walkway.
Lights out. Big Ben's dial, the Eye's 16 capsules and every window glow. They are glow-in-the-dark filament: no batteries, no wires.
Most of the day Tower Bridge lies flat across the Thames. This set catches it at the moment London still stops to watch: a tall ship has come up the river into the Pool of London, and the road has lifted to let it pass. The ship is printed into the middle row, so in your book it is always halfway through.
Already have the book?
Your book came with New York. Each row clicks onto its frame with two magnets and two V-keys. Lift it straight up and it comes free.
Once New York's three rows are off, lift its harbor plate out of the tray.
Drop in London's plate: the Thames, with a river bus and a red tug.
Set London's rows on, back to front. The grooves slide over the keys and the magnets pull each row home. New York goes back on the same way whenever you want it.
Opening the book
Drag to turn the book. Tap a number for its story.
The Thames runs through the middle of the set. Pick a landmark to see where it stands and what the model shows.
These pictures start from renders of the real CAD, which an image model then turns into what the printed set looks like. A checker compares each one against its render, and any picture that adds or changes a part is thrown out. Your own print's layer lines and colours will vary.
4 printed parts: three building rows and a harbor plate. Plus 6 disc magnets, 6 × 2 mm, two for each row.
Add-on: needs the Moonlit Atlas book
This pack is the city only. It stands up inside the Moonlit Atlas book, which is sold separately and comes with New York. The rows click onto the book's frames, so London swaps with New York or any other city set in seconds.
See the Moonlit Atlas book