The white Starpaw stand on a kitchen counter holding an iPad in landscape, a white mug and a bowl of lemons beside it

Starpaw Tablet Stand

A folding stand for a 10th-generation iPad, with a pink paw cut out of its back plate.

Flat, up, and back again

Folded flat

Folded, the stand is 2.3 in tall, paw side up: the back plate lies over the base with the arm tucked between them.

Lift the arm

The arm swings up on the lower hinge and carries the back plate with it, still lying level.

Tip the plate

The back plate turns on the upper hinge until it leans 17° back from upright, the two J-clips along its bottom edge.

Landscape, for watching

The iPad's long edge drops into the J-clips and its back rests on the plate. The paw hides behind the screen.

Portrait, for reading

Turn it on end and the same two clips hold the short edge, for a recipe or a book.

Fold it away

Lift the iPad out, tip the plate level and lower the arm. It is back to 2.3 in tall.

Up close

A paw on the back, planets underneath

Open, it stands 7.9 × 7.5 × 10.9 in wide, deep and tall; folded, 2.3 in.

The Starpaw stand on a light oak desk next to a coffee mug and a pencil cup
It sits on my desk between my coffee mug and the pencil cup, paw out to the room.
Close on the back plate: the pink paw frame set into the white plate, four toes and a pad
The paw is a pink frame set into the white plate, open in the middle.
The stand on a bedside table holding an iPad upright, a lit lamp and a mug beside it
Upright on my nightstand, it holds whatever I am reading before bed.

Two hinges, either way round

Made for a 10th-generation iPad without a case: films and video calls in landscape at a desk, recipes on the kitchen counter, reading in portrait by the bed.

The plate leans back 17° from upright, the same in both directions, and the two J-clips under its bottom edge catch whichever edge you set down.

The stand holding an iPad in landscape in its two J-clips
Side view to scale: the stand open, its plate leaning back from a dashed upright line, and the same stand folded flat
Side view, to scale. Open, the plate leans 17° from the dashed upright; folded, the plate lies level over the base, 2.3 in off the table.

One stand in the box

1
Starpaw Tablet Stand, white with a pink paw, folded flat
Size, open
7.9 × 7.5 × 10.9 in (W × D × H)
Height, folded
2.3 in
Weight
10.5 oz
Lean
17° back from upright
Holds
10th-generation iPad, no case (not included)
Ways round
Landscape or portrait, in the same two J-clips
Hinges
Two: base to arm, arm to plate
Look
White, pink paw cut-out, planets and stars engraved in the base
The stand from the side: the plate leaning back on one arm above the square base

Good to know

Which iPad does it fit?

It is made for the 10th-generation iPad without a case. The bottom edge sits in the two J-clips, long side or short side down.

Is the iPad included?

No. The stand comes on its own; the iPad in the pictures is there to show it in use.

How flat does it fold?

Both hinges fold it down to 2.3 in tall, with the back plate lying over the base and the paw facing up.

What is on the base?

A planet-and-star pattern engraved into the top of the base, under the arm.