Five turtles, all looking out.
At rest every head stands 2.2 mm proud of its shell, so each face is on show: sleepy, happy, grumpy, surprised and a wink.
Five turtles for your keyboard. Press one and it pulls its head in.
At rest every head stands 2.2 mm proud of its shell, so each face is on show: sleepy, happy, grumpy, surprised and a wink.
Nothing in here is powered. Your finger carries the cap 4 mm down the switch, shell and head with it.
Seen from the side with the shell cleared away: a pin on the head rides a slot in a plate that never moves. Going down, the slot leans back, and the head has to follow it.
At the bottom of the press the head has slid 3.1 mm back and its face sits just inside the rim of the shell.
The switch lifts the key, the slot walks the pin back up, and the face slides forward. Type across the row and the turtles duck in turn.
Midnight blue, oak, dark oak, brass and jade, each with the same plated pattern across its back.
Every turtle has its own face and its own shell. Put the one that suits you on the key you hit most, or run all five along a row.
Eyes closed, mouth open in a little yawn. Midnight blue shell.
Round eyes and a wide grin. Oak shell.
Brows down, mouth turned down. Dark oak shell.
Wide eyes and an O of a mouth. Brass shell.
One eye shut and a sly smile. Jade shell.
The whole row is 3.7 × 0.7 × 0.8 in and weighs 0.5 oz, all five together. Small enough to sit in a palm, made to sit on a keyboard.
Each keycap stands on its own anchor frame, which sits on the keyboard plate around the switch and holds two upright plates. Those plates never move. Each one has a slot cut on a slant, and a round pin on the turtle's head rides in it.
When you press, the shell and the head go down with the key. The slot leans backward as it drops, so the pin, and the whole head with it, is pushed back under the shell. Let go and the same slot brings it forward again.
Key up: the face is out.
Turtle Moods Keycap Set: a row of moods that hide when you press them.
They are made for Cherry MX-style switches on a plate-mounted keyboard, spaced 0.75 in (19.05 mm) apart like a standard row. Each keycap's anchor frame sits on the plate around its switch.
The turtle pulls its head back under its shell: 3.1 mm back over a 4 mm press. When you let go, the switch lifts the key and the head slides forward again.
No. There is nothing electric in them. The only thing that moves a turtle is your press, through a slot and a pin.
Yes. Each has its own face (sleepy, happy, grumpy, surprised and wink) and its own shell colour (midnight blue, oak, dark oak, brass and jade). The bases are cream and the heads are mint on all five.