Named stand for a stainless pet bowl For pet owners who feed from a standard 1-quart stainless bowl: the 165 mm rolled rim drops in from the top and hangs on a 2.5 mm internal lip, so the bowl lifts straight out for washing. Two 20 mm finger scallops help. Prints as one piece, 200 x 200 mm, with recesses for four silicone pads.

Drops in, lifts out. A standard 1-quart stainless bowl drops in from the top and hangs by its rolled rim on a 2.5 mm annular support lip. Radial clearance is 0.75 mm per side, so the fit is snug without binding, and the bowl bottom floats 2 mm above the floor. Lift it out for washing.

Wide, calm, low. The 200 x 200 mm footprint tapers 7 mm per side toward the top, with 12 mm squircle corners and a 6 mm top roundover. Two 20 mm radius scallops on opposite sides open a finger path to the rim. Overall height is 76 mm, keeping the centre of gravity low.

One piece, no supports. Prints as one piece with no supports: flat 5 mm floor on the bed, 3.2 mm walls, and a bore entry rounded 2.5 mm. The underside carries four recesses at plus or minus 70 mm for 20 x 2 mm self-adhesive silicone bumpers, which sit 0.8 mm proud to grip the floor.