Randomized dice rolls for tabletop play. For tabletop RPG and board game nights: drop dice into the funnel hopper, let them tumble down the spiral ramp winding 2.42 turns around the central pillar, and watch them exit the domed chute onto the integrated landing tab. Two printed pieces, funnel and tower body, assemble without hardware.

Dice in the top, out at the base. Drop dice into the funnel hopper at the top. They fall onto a spiral ramp that winds 2.42 turns around the central pillar, tumbling against overlapping guide walls the whole way down, then leave through a domed chute near the base onto the integrated landing tab.

Two parts, one press-fit. Two printed parts: tower_body and funnel. The body holds the ramp, central pillar and guide walls as one piece, so assembly is just seating the funnel in the top opening. The exit cutout is raised off the base and its lower corners carry a generous fillet.

Printed flat-based, 8.3 in tall. The piece stands 8.3 in tall. Its wide lobed base offers a broad, stable footprint and doubles as the landing area, while the funnel forms a separate piece finished in a contrasting tone, with a fine layer finish throughout.