The old Pods/Workds Pod purchased before July 2022 will still remain the 3-year warranty, the accompanying furniture included in WorkPod (Smart desk Pro, Ergo chair Pro+, Cable tray, Filing Cabinet, Dual Monitor Arm, Anti-fatigue Mat) will be covered for warranty according to theirs own warranty period. Please visit https://www.autonomous.ai/help-center/policy/warranty-policy for more references.

The WorkPod is about 12' x 9'. For a comfortable fit, we recommend an area around double of that – 24' by 18'.

Suitable common surfaces include brick, concrete, gravel, grass, etc. The foundation is uniquely engineered to bear the weight of the WorkPod and an additional 1 metric ton without the need for ground fixtures.

While flat ground is always best for ease of assembly, one of the beauties of the WorkPod foundation is its stability even if the ground is not completely level. We do recommend that any slope does not exceed 5°, or approximately 4.5 inches.

WorkPod can be easily disassembled and put up again at its new location.

It has a simple port for power connection, so all you need to do is connect the outdoor wire to an existing power source from your home.

Yes, Pod includes inputs for you to install your own heating and air conditioning units as needed. Pod also has an exhaust fan and an air duct to keep air fresh and circulating. We can provide a technical drawing to prevent cutting electrical wires. A 10,000 - 14,000 BTU air conditioner with heat is suitable for WorkPod.

The WorkPod is solidly built from several durable materials. The inner layer of Honeycomb paper has the effect of soundproofing and heat resistance. All glass is made of tempered glass and is 5/16” thick, which also helps you maintain the peace and tranquility of your oasis.

The maximum wattage for WorkPod is 2750W.

Its walls will easily support basic fixtures like frames and shelves, but please be aware that power lines are contained within the walls.

We currently have a contractor network available in California and can assist with assembly service anywhere in California. Soon to be available in other regions.

WorkPod was specifically engineered to be DIY friendly. Very minimal expertise is required, but if you’re a complete novice or feeling somewhat unsure, it can be helpful to have a spare pair of hands to help. Feel free to give us a call anytime, too. For optimal results, we recommend hiring professional help to assemble your Pod.

As user assembly and setup may differ widely across different environments and scenarios, we cannot offer a trial period for the WorkPod Versatile itself.

WorkPod is designed to a specific height and square footage (102 sq. ft.), so that permits are not usually required for the majority of states and localities. However, as regulations do change, we always recommend checking with your local authorities or homeowners association.

We are happy to provide building plans and other details if you need them for your own paperwork. Please refer to the following links for assembly manuals:
- Left side: here
- Right side: here
If you have any questions feel free contact us at [email protected] for more information.

The foundation can support 2.9 tons (included Pod body)