AGPTEK Bluetooth 4.1 Headset Wireless in-ear Headphone
Small, lightweight and stylish.
1. Power on: Press and hold the Multifunction Button for 3 seconds until the LED light begins flashing.
· 2. Power off: Press and hold the Multifunction Button for 5 seconds. The LED will light up, and then turn off.
The first time you use this device,please pair this device first.
1. To enter pairing mode, press and hold the Multifunction Button until both red and blue LEDS flash.
· 2. Turn the bluetooth on, search for the Y8 on your mobile phone and connect.
3. To complete pairing, some devices require a pass key or code, please enter "0000".
· 4. Once successfully paired, the devices can be powered off. To re-connect simply power them both on, no need to pair again.
Note: If you wish to use the earbud with another mobile phone, you must restart the pairing process with the new devices from step one. This bluetooth 4.1 Earbud can connect two devices at the same time.
If your phone can't search the bluetooth, please kindly try to restart your phone.
please make sure this earbud has been going into pairing mode.
1. Power it off.
· 2. Power it on and let go of the button before it tries to pair.
· 3. Now the blue light is on (but not in pairing mode).
· 4. Hold the button again for a second. The mode will then change back to English.
When charging is finished, the red LED will turn off.
1. Using the supplied USB cable, connect the small end to the charging port of the earbud.
· 2. Connect the other end to the USB input of your PC, laptop or USB power converter, The earbud's LED light will glow red during charging.
Don't see the answer to your question?