How to Clean a Computer Mouse: Easy to Do
Smart Products

How to Clean a Computer Mouse: Easy to Do

|Aug 12, 2022

What is the recommended frequency of cleaning the keyboard and mouse? A good schedule for cleaning your keyboard would be every two to three weeks. Compressed air and a cleaning blob will help you reach even the smallest corners your hands cannot reach. You shouldn't eat food peripherals as a general rule. You can get them in the corners of your keyboard, which are very difficult to remove when cleaning a mouse.

Do You Need to Clean a Computer Mouse?

Do You Need to Clean a Computer Mouse?

Your mouse can be cleaned in 5 minutes if you take the time. It is necessary to clean two parts. The first part is where you touch it, and the underside is where dust can accumulate in the scanner area (usually red), which is illuminated.

A microfiber cloth dampened with mild cleaner or water works best when cleaning a mouse. If you wish to clean your glasses with hydrogen peroxide, you could use diluted hydrogen peroxide or a little of the same spray you use to clean your glasses. Spraying your mouse directly is not recommended. Make sure both sides of the mouse are cleaned with a spray cloth, letting it soak in for a few minutes. You can keep the underside of a mouse clean by placing it in a dedicated Keyboard and Mouse Tray, fitted with a DeltaHub minimalistic desk pad and an ergonomic wrist rest.

Cleaning Your Mouse

So, how to clean a gaming mouse? The process of cleaning a gaming mouse or any other mouse is easy. A slightly damp rag works well for wiping down the trackball if it has one (that large ball on the underside). Using a dampened rag with vinegar is again the best way to clean the trackball; if you decide to use something else instead, that's fine too, but if you've already disposed of the vinegar solution, there's no need to do it twice.

Cleaning Your Mouse

Clean the mouse's underside where your trackball sits using Q-tips and set the trackball aside. There should be a number of wheels down there. Please make sure you pay attention to them. It's important to make sure the opening where the light exits from is clean and dust-free if you have an optical mouse with a light on the underside.

There is probably no piece of computer equipment that requires more frequent cleaning than this one. Food, drinks, dust, and other debris frequently find their way onto the computer pad or surface on which the mouse is rolled, where they quickly become engulfed in the ball.

After being collected inside the mouse, it is supposed to move in x and y directions on the screen via the little rollers that turn freely. Whenever the ball or rollers in your computer mouse cannot move due to sticky liquids or dirt particles, it is time to clean them.

How to Clean Your Mouse

How to Clean Your Mouse

There is little difference between cleaning a wireless mouse and a mechanical one, although the latter requires a little more effort. It is not necessary to clean optical mice internally because they do not contain rotating parts. However, dust can accumulate near the light emitter over time, causing them to become sticky. As a result, the cursor may move erratically, or the mouse may not work properly.

The dust and particles inside mechanical mice can make tracking or moving them difficult, which can make them difficult to track. Cleaning a mouse may be necessary if the mouse pointer is not moving smoothly. Now, gather some supplies:

  • Lint-free, soft cloths
  • A Q-Tip or a foam swab
  • Compressed air in a can
  • Isopropyl alcohol


  • Connect the mouse to a USB or PS/2 port and unplug it. Shutting down the computer before unplugging the mouse from the PS/2 port is necessary.
  • To clean the top and bottom of the mouse, moisten a cotton cloth with rubbing alcohol.
  • Turning the ball-cover ring counterclockwise can remove the tracking ball from a mechanical mouse. With a cotton cloth moistened with rubbing alcohol, wipe the tracking ball and interior of the mouse.
  • Dry all parts thoroughly before reconnecting and reassembling the mouse. Computers connected to PS/2 ports cannot be turned on until they are connected to a PS/2 port.
  • Simply move the mouse back and forth across a clean sheet of paper if you wish to give the mouse a quick cleaning. Some dust and particles are expected to rub off the paper.



  • Your mouse's exterior is probably the most frequent and most confidently cleaned part of the mouse.
  • Ensure you unplug your mouse first, then wipe its exterior with a damp cloth and some rubbing oil. You can clean its exterior properly if your mouse is connected to a device. When you have allowed it to dry, you should have a squeaky clean mouse exterior.
  • Take a cotton bud and gently wipe it over areas of the mouse that are difficult to clean with a cloth, such as angled edges.

Mouse buttons

  • It can be trickier to clean the buttons because you may damage them if you don't do it properly.
  • Use a toothpick to gently remove dirt or grime that may have built up around buttons that you may not otherwise be able to reach. Make sure your mouse is disconnected from any devices while you do this.
  • Make sure you remove any grease or dust that has built up on the buttons before using rubbing alcohol to disinfect them.

How Do You Disinfect Your Computer Gadge?

How Do You Disinfect Your Computer Gadge?

The inner workings of the essential office accessories are not damaged by rubbing alcohol since it evaporates quickly. The keys and mouse are wiped down with a cotton pad soaked in water. As glass cleaner leaves streaks on computer and TV screens, diluted rubbing alcohol in a spray bottle works great.

Their electronic cleaning wipes can be ordered online. This cleaner is primarily intended to clean screens but can also be used to clean keyboards. After wiping the surface with the wipes, letting it sit for 30 seconds, and wiping it off with the washcloth, follow the directions. You can find an easy-clean mouse and other office accessories in our gamer purchase program.

Bulk Order Offer 2024

Spread the word