Question 1

Are You a Runner or Walker?

Accepted Answer

if you’re intending to use your treadmill for walking, or with Standing desk, then a machine with a short belt (35-40 inches long and 18-22 inches wide) could be an ideal Walking treadmill for you. Super compact and effective.

Question 2

How Often to lubricate my treadmill?

Accepted Answer

The walking belt comes pre-lubricated from the factory. The treadmills should be lubricated every 3-4 months (regardless of use) or every 50 hours of use.

Question 3

Treadmill walking belt slips or is off center

Accepted Answer

If the belt has become off-center, your owner's manual will have instructions on how to re-align it. There are also treadmill troubleshooting instructions such as how to tighten the belt to prevent it from slipping.

Question 4

Can I still get work done if I'm working at a treadmill desk?

Accepted Answer

You can choose your own pace while you use our custom-built desktop to do your work. It takes a slight amount of time to adjust to moving while typing on a computer or writing on paper, but in no time, you’ll be able to do it all. There are even a number of studies that show positive benefits to standing at a desk instead of sitting all day, as well as moving your legs while working at a desk to increase productivity and creative thought.

Question 5

Why won't my treadmill start even though the console display works?

Accepted Answer

Main causes: missing safety key, if the error code "----" or "E07" showing, means the safety key not mounted correctly, check again and make sure safety key put in place.

Question 6

Just bought a new treadmill. Should I be concerned about the line on the running belt?

Accepted Answer

This is Seal line, The process of joining the belt to itself leaves a visible "seal line", indicating where the belt has been joined together. this line are a perfectly normal part of treadmills, All treadmills have something similar and are not a cause for concern, they will not impede the function of the treadmill.

Question 7

When I turn my treadmill on, I get this read out on the screen “- - - -“ or "E07". Do you have any idea what I can do or is it broken?

Accepted Answer

This Screen error“- - - -“ or “E07” showing because of the safety key not detected, check ifthe safety key attached on the handlebar correctly.